1.Performance range (by design)
flow: Q 1.6-400m3/h
range: H 5-125m
pressure: P ≤ 1.6MPa
temperature: t -20 ~ +150
Chlor alkali, soda industry, chemical fertilizer, pesticide; medicine; petroleum chemical industry, chemical fiber, papermaking industry; dye industry; environmental engineering and water treatment system.
Horizontal structure back pullout, the pump and motor are connected by coupling, the impeller is installed in the floor after the open, three bearing, seal with external mechanical seal, a cooling device, the oil level of oil bearing body microscope; compact structure. The pump in the pump body are cast on the legs, can bear the load from the pipeline and directly transferred to the base, so that pump rotor not because of pump load and bending, thus ensuring the bearing and mechanical seal has the best service life. When the utility model is not needed, the pipeline which is connected with the pump body is opened, so long as the bolt of the bracket and the pump body is opened, the impeller and the mechanical seal can be maintained separately, and the utility model is simple and convenient.
The rotation direction of the pump: from the motor side towards the pump, clockwise rotation.
Power supporting the use of Y type of General Motors and YB type of anti riot motor.
This series of pumps are developed by our company with foreign advanced technology
Can transport solid particles, medium that are easy to crystallize , heat resistance and corrosion resistance, no blockage.
5.Seal type: mechanical seal or packing seal.
6.The main parts of the pump and the media contact material are as follows
ZG1Cr18Ni9 ZG1Cr18Ni9Ti ZGOCr18Ni12Mo2Ti ZG1Cr18Ni12Mo2Ti ZG00Cr14Ni14Si4 ZG00Cr18Ni10
CGCr28 ZG1Cr18Mn13Mo2 uN or 316 /316L /Monelt...
Product Categories : Chemical Pump